Monolithic Power Systems (MPS) MPS4425A Synchronous Step-Down LED Driver

Author : Monolithicpowersystems Published Time : 2019-09-17
Monolithic Power Systems (MPS) MPS4425A Synchronous Step-Down LED Driver is a high-frequency, synchronous, rectified, step-down, switch-mode white LED driver with built-in power MOSFETs. The device offers a very compact solution to achieve 1.5A of continuous output current with excellent load and line regulation over a wide input supply range. The MPQ4425A has synchronous mode operation to get high efficiency. Current mode operation provides a fast transient response and eases loop stabilization. Full protection features include over-current protection (OCP) and thermal shutdown (TSD). The MPQ4425A requires a minimal number of readily available, standard external components, and is available in a space-saving QFN-13 (2.5mmx3mm) package.

Features

Wide 4V to 36V Operating Input Range85mΩ/50mΩ Low RDS(ON) Internal Power MOSFETsHigh-Efficiency Synchronous Mode OperationDefault 2.2MHz Switching FrequencyPWM Dimming (Min 100Hz Dimming Frequency)Forced CCM Mode0.2V Reference VoltageInternal Soft Start

Applications

Automotive LED Lighting
Monolithicpowersystems Newest

Monolithic Power Systems (MPS) eMotion System™ Smart Motor Module Evaluation Kits are a family of fully integrated motor solutions for servo motor applications.

Date: 2019-09-24

Monolithic Power Systems (MPS) MP2330x Synchronous Buck Converters are fully integrated, high-frequency, step-down, and switch-mode converters with internal power MOSFETs.

Date: 2019-09-18

Monolithic Power Systems (MPS) MPS4425A Synchronous Step-Down LED Driver is a high-frequency, synchronous, rectified, step-down, switch-mode white LED driver with built-in power MOSFETs.

Date: 2019-09-17

Monolithic Power Systems (MPS) EV8864-Q-00A Evaluation Board is used for demonstrating the performance of the MP8864, a highly integrated and high frequency synchronous step-down switcher.

Date: 2019-09-17

Monolithic Power Systems (MPS) MP6539B 100V 3-Phase BLDC Motor Pre-Driver is capable of driving three half-bridges consisting of six N-channel power MOSFETs up to 100V.

Date: 2019-09-16

Monolithic Power Systems (MPS) MP2152 Sync Step-Down Converter offers 2A of continuous output current from a 2.5V to 5.5V input voltage with excellent load and line regulation.

Date: 2019-09-12

Monolithic Power Systems (MPS) MP5030D USB Current-Limit Switch integrates charging port identification circuitry.

Date: 2019-09-11

Monolithic Power Systems (MPS) MP6500A 35V, 2.5A, Stepper Motor Driver has a built-in translator and current regulation.

Date: 2019-09-11