TDK HAL188y Programmable Linear Hall-Effect Sensors

Author : Tdk Published Time : 2018-12-11
TDK HAL188y Programmable Linear Hall-Effect Sensors are designed with a ratiometric and linear analog output proportional to the magnetic flux density applied to the sensor surface. The robust and cost-effective design makes the sensor ideal for small-angle or linear position measurements, gear position detection, rotary selectors, and current sensing for battery management. The HAL188y hall-effect sensors are AEC-Q100 qualified and operate in the junction temperature ranging from -40°C to 170°C. These sensors are available in a very small leaded TO92UA-2 package.

Features

Ratiometric linear output proportional to the magnetic fieldDigital signal processingOn-chip temperature compensationOverflow or underflow diagnostic featureActive offset compensationOperates from -40°C up to 170°C junction temperatureOperates from 4.5V up to 5.5V supply voltage in specificationPre-set temperature characteristics for matching all common magnetic materialsOperates with static and dynamic magnetic fields up to 2.25kHzOvervoltage and reverse-voltage protection at VSUP pinMagnetic characteristics extremely robust against mechanical stressShort-circuit protected push-pull outputEMC and ESD optimized designAEC-Q100 qualified

Applications

Small-angle or linear position measurementsGear position detection
Tdk Newest

TDK TSP15 Piezoelectric Powder Level Sensor is designed for detecting powder in copiers, laser printers, and more by utilizing a piezoelectric ceramic sensor element.

Date: 2019-09-23

TDK CNC Multilayer Ceramic Chip Capacitors feature a ±10% tolerance rating, a 16 to 100VDC voltage range, and -55°C to +125°C temperature range.

Date: 2019-09-20

TDK InvenSense ICS-41351 Digital Multi-Mode Microphone features a MEMS microphone element, an impedance converter amplifier, and a fourth-order Σ-Δ modulator.

Date: 2019-09-04

TDK InvenSense ICS-40740 Ultra-Low Noise Microphones feature ultra-low noise, high dynamic range, differential analog output, and a bottom port.

Date: 2019-08-19

TDK InvenSense IAM-20381 3-Axis MotionTracking Accelerometer offer on-chip 16-bit ADCs, a 1.71 to 3.6VDD voltage range, and I2C and SPI serial interfaces.

Date: 2019-07-22

TDK InvenSense IAM-20380 High Performance Gyroscope offers a 0.5 to 4VDD voltage range, a 400kHz clock frequency, and -40°C to +85°C operating temperature range.

Date: 2019-07-22

TDK InvenSense IAM-20680 6-Axis MotionTracking Device combines a 3-axis gyroscope and a 3-axis accelerometer in a small 3x3x0.75mm package.

Date: 2019-06-24

TDK PiezoListen™ Ultra-Thin Piezo Speakers are high-power actuators that convert virtually any surface into a speaker without compromising the existing structural design.

Date: 2019-06-10