Monolithic Power Systems (MPS) MPM3695-25 16V 20A Scalable DC/DC Power Module

Author : Monolithicpowersystems Published Time : 2019-05-30
Monolithic Power Systems (MPS) MPM3695-25 16V 20A Scalable DC/DC Power Module is a fully integrated power module with a PMBus interface. The MPM3695-25 achieves up to 25A of peak output current with excellent load and line regulation. The module operates with high efficiency over a wide load range. The MPM3695-25 can be paralleled to deliver a higher load current. The module uses proprietary, multi-phase constant-on-time (MCOT) control. This provides ultra-fast transient response and simple loop compensation. The PMBus interface provides module configurations and monitoring of key parameters.

Features

Wide Input Voltage Range from 3V
3V-16V Input Voltage with External VCC4V-16V Input Voltage with Internal VCC0.5V to 5.5V Output Voltage Range20A Continuous Output Current, Peak 25AAuto Interleaving for Multi-Phase OperationAuto Compensation with Adaptive MCOT for Ultra-Fast Transient Response1% Reference Voltage Over 0°C to +70°C Junction Temperature RangeTrue Remote Sense of Output Voltage

Applications

Telecom and Networking SystemsIndustrial Equipment
Monolithicpowersystems Newest

Monolithic Power Systems (MPS) eMotion System™ Smart Motor Module Evaluation Kits are a family of fully integrated motor solutions for servo motor applications.

Date: 2019-09-24

Monolithic Power Systems (MPS) MP2330x Synchronous Buck Converters are fully integrated, high-frequency, step-down, and switch-mode converters with internal power MOSFETs.

Date: 2019-09-18

Monolithic Power Systems (MPS) MPS4425A Synchronous Step-Down LED Driver is a high-frequency, synchronous, rectified, step-down, switch-mode white LED driver with built-in power MOSFETs.

Date: 2019-09-17

Monolithic Power Systems (MPS) EV8864-Q-00A Evaluation Board is used for demonstrating the performance of the MP8864, a highly integrated and high frequency synchronous step-down switcher.

Date: 2019-09-17

Monolithic Power Systems (MPS) MP6539B 100V 3-Phase BLDC Motor Pre-Driver is capable of driving three half-bridges consisting of six N-channel power MOSFETs up to 100V.

Date: 2019-09-16

Monolithic Power Systems (MPS) MP2152 Sync Step-Down Converter offers 2A of continuous output current from a 2.5V to 5.5V input voltage with excellent load and line regulation.

Date: 2019-09-12

Monolithic Power Systems (MPS) MP5030D USB Current-Limit Switch integrates charging port identification circuitry.

Date: 2019-09-11

Monolithic Power Systems (MPS) MP6500A 35V, 2.5A, Stepper Motor Driver has a built-in translator and current regulation.

Date: 2019-09-11